Flood

Peak-flow frequency information is needed for flood-plain mapping, design of highway infrastructure, and many other purposes across Montana. The USGS Wyoming-Montana Water Science Center has an ongoing project working to update peak-flow frequency estimates at USGS streamgages across the state.

The USGS WY-MT Water Science Center provided discharge measurements and high water mark (HWM) flagging for the June 2018 flooding along Elk Creek in Augusta, Montana.

Major floods in 1996-1997 on the Yellowstone River intensified public debate over the effects of human activities on the Yellowstone River. The Yellowstone River Conservation District Council partnered with the U.S. Army Corps of Engineers to conduct a cumulative-effects study on the Yellowstone. For that study, the USGS calculated streamflow statistics for unregulated (no development) and...

The USGS monitors flood and high-flow conditions at more than 300 streamgages across Montana and Wyoming. Water level and flow information are used by the National Weather Service (NWS) to make accurate flood forecasts. High-flow conditions are expressed as percentiles comparing current (within the past few hours) instantaneous flow to historical daily mean flow for all days of the year.

The purpose of the crest-stage gage network is to inventory and monitor peak discharges throughout the state of Montana, with special emphasis on streams that may damage transportation infrastructure. Recorded data documenting peak streamflow at various sites within the state will be used by the Montana Department of Transportation to support assessments of culvert size, bridge construction, and...

Bridge scour is the erosion of streambed material away from pier foundations and abutments and is the leading cause of bridge failure in the United States (Richardson and Davis, 2001). Since the early 1990s, the U.S. Geological Survey (USGS) and the Montana Department of Transportation (MDT) have had a cooperative bridge scour project in Montana.