Skip to main content
U.S. flag

An official website of the United States government

Publications

Filter Total Items: 166

Evaluation and comparison of the IRS-P6 and the landsat sensors

The Indian Remote Sensing Satellite (IRS-P6), also called ResourceSat-1, was launched in a polar sun-synchronous orbit on October 17, 2003. It carries three sensors: the highresolution Linear Imaging Self-Scanner (LISS-IV), the mediumresolution Linear Imaging Self-Scanner (LISS-III), and the Advanced Wide-Field Sensor (AWiFS). These three sensors provide images of different resolutions and coverag
Authors
G. Chander, M.J. Coan, P. L. Scaramuzza

L5 TM radiometric recalibration procedure using the internal calibration trends from the NLAPS trending database

From the Landsat program's inception in 1972 to the present, the earth science user community has benefited from a historical record of remotely sensed data. The multispectral data from the Landsat 5 (L5) Thematic Mapper (TM) sensor provide the backbone for this extensive archive. Historically, the radiometric calibration procedure for this imagery used the instrument's response to the Internal Ca
Authors
G. Chander, Md. O. Haque, E. Micijevic, J. A. Barsi

Development of landsat-5 thematic mapper internal calibrator gain and offset table

The National Landsat Archive Production System (NLAPS) has been the primary processing system for Landsat data since U.S. Geological Survey (USGS) Earth Resources Observation and Science Center (EROS) started archiving Landsat data. NLAPS converts raw satellite data into radiometrically and geometrically calibrated products. NLAPS has historically used the Internal Calibrator (IC) to calibrate the
Authors
J. A. Barsi, G. Chander, E. Micijevic, B. L. Markham, Md. O. Haque

Radiometric cross-calibration of the Terra MODIS and Landsat 7 ETM+ using an invariant desert site

A methodology for long-term radiometric cross-calibration between the Terra Moderate Resolution Imaging Spectroradiometer (MODIS) and Landsat 7 (L7) Enhanced Thematic Mapper Plus (ETM+) sensors was developed. The approach involves calibration of near-simultaneous surface observations between 2000 and 2007. Fifty-seven cloud-free image pairs were carefully selected over the Libyan desert for this s
Authors
T. Choi, A. Angal, G. Chander, X. Xiong

Landsat continuity: Issues and opportunities for land cover monitoring

Initiated in 1972, the Landsat program has provided a continuous record of earth observation for 35 years. The assemblage of Landsat spatial, spectral, and temporal resolutions, over a reasonably sized image extent, results in imagery that can be processed to represent land cover over large areas with an amount of spatial detail that is absolutely unique and indispensable for monitoring, managemen
Authors
M.A. Wulder, Joanne C. White, S.N. Goward, J. G. Masek, J. R. Irons, M. Herold, W.B. Cohen, Thomas R. Loveland, C. E. Woodcock

Preliminary radiometric calibration assessment of ALOS AVNIR-2

This paper summarizes the activities carried out in the frame of the data quality activities of the Advanced Visible and Near Infrared Radiometer type 2 (AVNIR-2) sensor onboard the Advanced Land Observing Satellite (ALOS). Assessment of the radiometric calibration of the AVNIR-2 multi-spectral imager is achieved via three intercomparisons to currently flying sensors over the Libyan desert, during
Authors
M. Bouvet, P. Goryl, G. Chander, R. Santer, S. Saunier

The effect of variations in relative spectral response on the retrieval of land surface parameters from multiple sources of remotely sensed imagery

Airborne visible infrared imaging spectrometer (AVIRIS) images, collected over Sioux Falls, South Dakota, were used to quantify the effect of spectral response on different surface materials and to develop spectral "figures-of-merit" for spectral responses covering similar, but not identical spectral bands. In this simulation, AVIRIS images were converted to radiance, then spectrally resampled to
Authors
D. J. Meyer, G. Chander

Geometric correction and digital elevation extraction using multiple MTI datasets

Digital Elevation Models (DEMs) are traditionally acquired from a stereo pair of aerial photographs sequentially captured by an airborne metric camera. Standard DEM extraction techniques can be naturally extended to satellite imagery, but the particular characteristics of satellite imaging can cause difficulties. The spacecraft ephemeris with respect to the ground site during image collects is the
Authors
Jeffrey A. Mercier, Robert A. Schowengerdt, James C. Storey, Jody L. Smith

Revised landsat-5 thematic mapper radiometric calibration

Effective April 2, 2007, the radiometric calibration of Landsat-5 (L5) Thematic Mapper (TM) data that are processed and distributed by the U.S. Geological Survey (USGS) Center for Earth Resources Observation and Science (EROS) will be updated. The lifetime gain model that was implemented on May 5, 2003, for the reflective bands (1-5, 7) will be replaced by a new lifetime radiometric-calibration cu
Authors
G. Chander, B. L. Markham, J. A. Barsi

USGS QA Plan: Certification of digital airborne mapping products

To facilitate acceptance of new digital technologies in aerial imaging and mapping, the US Geological Survey (USGS) and its partners have launched a Quality Assurance (QA) Plan for Digital Aerial Imagery. This should provide a foundation for the quality of digital aerial imagery and products. It introduces broader considerations regarding processes employed by aerial flyers in collecting, processi
Authors
J. Christopherson

Comparison of outgassing models for the Landsat thematic mapper sensors

The Thematic Mapper (TM) is a multi-spectral electro-optical sensor featured onboard both the Landsat 4 (L4) and Landsat 5 (L5) satellites. TM sensors have seven spectral bands with center wavelengths of approximately 0.49, 0.56, 0.66, 0.83, 1.65, 11.5 and 2.21 μm, respectively. The visible near-infrared (VNIR) bands are located on the primary focal plane (PFP), and two short-wave infrared (SWIR)
Authors
E. Micijevic, G. Chander

Consistency of L4 TM absolute calibration with respect to the L5 TM sensor based on near-simultaneous image acquisition

The Landsat archive provides more than 35 years of uninterrupted multispectral remotely sensed data of Earth observations. Since 1972, Landsat missions have carried different types of sensors, from the Return Beam Vidicon (RBV) camera to the Enhanced Thematic Mapper Plus (ETM+). However, the Thematic Mapper (TM) sensors on Landsat 4 (L4) and Landsat 5 (L5), launched in 1982 and 1984 respectively,
Authors
G. Chander, D. L. Helder, R. Malla, E. Micijevic, C. J. Mettler
Was this page helpful?