Ambient flow and transport in long-screened, sand-packed wells: Insights into cross contamination and wellbore flow

The presence of long-screened wells with a surrounding sand pack can have a major effect on the redistribution of contaminants in groundwater, particularly when the wells are set in low-hydraulic conductivity aquifers. Such redistribution, or cross contamination, can occur through vertical flow and advective transport or by in-well mixing via multiple non-advective transport processes. A multi-method approach, including the use of single borehole dilution tracer (SBDT) logging, was undertaken to estimate vertical transport of trichloroethylene (TCE) in 8 discontinued remedial extraction wells, all constructed with long screens (100 ft, or 30.6 m long) and surrounding sand packs, at Site 25, Edwards Air Force Base, California. The site is within an enclosed drainage basin that is underlain primarily by quartz-monzonite-granitic rocks in various states of weathering. Prior to this study, little information was available on the depths of fracture zones intersecting the wellbores. Results indicate that because of in-well mixing processes, a potential redistribution of TCE of up to 9 g/d per well occurs as a consequence of leaving the wells inactive (unpumped) and unsealed, as measured by SBDT logging. Simulations of flow made with a generic model of the site show that if the wells were to be sealed with well liners, with the intent of reducing vertical TCE transport but the sand pack left intact, TCE transport decreases by 53% overall compared to leaving the wells unlined.