The alluvial aquifer in Fountain Creek Valley between Colorado Springs and Widefield is the source for several public-supply systems. Because of the importance of this aquifer, defining aquifer boundaries, areas where underflow occurs, and where Fountain Creek is hydraulically connected to the aquifer will greatly add to the understanding of the alluvial aquifer and management of the public- supply systems. Bedrock altitude, water-table altitude for October 1991, saturated thickness for October 1991, selected hydrogeologic sections in the alluvial aquifer and adjacent deposits of the Fountain Creek Valley, and estimated underflow rates are mapped or tabulated for the area between Colorado Springs and Widefield, Colorado. Results from test drilling indicate that the bedrock surface is highly irregular and that several ridges and buried channels exist in the study area. These features affect the direction of ground-water flow on a local scale. In places, a shale ridge prevents exchange of water between Fountain Creek and the aquifer. Generally, ground water flowed toward Fountain Creek during the study (June 1991 to September 1992) in response to relatively high hydraulic heads in the aquifer and the steep gradients on the boundaries of the study area. Water levels, which were measured monthly, varied little during the study, except in areas near pumping wells or adjacent to Fountain Creek. Hydraulic-conductivity values, estimated from 30 bail tests in wells completed in the alluvial aquifer, were used to determine underflow across the saturated boundaries of the alluvial aquifer. Estimated hydraulic-conductivity values range from 1 to about 1,300 feet per day; the larger values occur in the buried channel of the alluvial aquifer and the smaller values occur near the boundaries of the saturated alluvium. Estimated underflow into the study area exceeded underflow out of the study area by about 10 times. Gain-loss investigations along Fountain Creek indicated that the creek primarily was gaining during the study.
