David A Lockner
David Lockner is a geophysicist in the Earthquake Science Center.
Science and Products
Filter Total Items: 13
No Result Found
Filter Total Items: 112
Earthquake source properties from instrumented laboratory stick-slip
Stick-slip experiments were performed to determine the influence of the testing apparatus on source properties, develop methods to relate stick-slip to natural earthquakes and examine the hypothesis of McGarr [2012] that the product of stiffness, k, and slip duration, Δt, is scale-independent and the same order as for earthquakes. The experiments use the double-direct shear geometry, Sierra White
Authors
Brian D. Kilgore, Arthur F. McGarr, Nicholas M. Beeler, David A. Lockner
Frictional strength of wet and dry montmorillonite
Montmorillonite is a common mineral in fault zones, and its low strength relative to other common gouge minerals is important in many models of fault rheology. However, the coefficient of friction, μ, varies with degree of saturation and is not well constrained in the literature due to the difficulty of establishing fully drained or fully dried states in the laboratory. We measured μ of both satur
Authors
Carolyn A. Morrow, Diane E. Moore, David A. Lockner
Calibrated acoustic emission system records M -3.5 to M -8 events generated on a saw-cut granite sample
Acoustic emission (AE) analyses have been used for decades for rock mechanics testing, but because AE systems are not typically calibrated, the absolute sizes of dynamic microcrack growth and other physical processes responsible for the generation of AEs are poorly constrained. We describe a calibration technique for the AE recording system as a whole (transducers + amplifiers + digitizers + sampl
Authors
Gregory C. McLaskey, David A. Lockner
Hydrothermal frictional strengths of rock and mineral samples relevant to the creeping section of the San Andreas Fault
We compare frictional strengths in the temperature range 25–250 °C of fault gouge from SAFOD (CDZ and SDZ) with quartzofeldspathic wall rocks typical of the central creeping section of the San Andreas Fault (Great Valley sequence and Franciscan Complex). The Great Valley and Franciscan samples have coefficients of friction, μ > 0.35 at all experimental conditions. Strength is unchanged between 25°
Authors
Diane E. Moore, David A. Lockner, Stephen H. Hickman
Gallery of melt textures developed in Westerly Granite during high-pressure triaxial friction experiments
IntroductionMelting occurred during stick-slip faulting of granite blocks sheared at room-dry, room-temperature conditions in a triaxial apparatus at 200–400 megapascals (MPa) confining pressure. Petrographic examinations of melt textures focused largely on the 400-MPa run products. This report presents an overview of the petrographic data collected on those samples, followed by brief descriptions
Authors
Diane E. Moore, David A. Lockner, Brian D. Kilgore, Nicholas M. Beeler
Evolution of fracture permeability of ultramafic rocks undergoing serpentinization at hydrothermal conditions: An experimental study
We performed flow-through laboratory experiments on five cylindrically cored samples of ultramafic rocks, in which we generated a well-mated through-going tensile fracture, to investigate evolution of fracture permeability during serpentinization. The samples were tested in a triaxial loading machine at a confining pressure of 50 MPa, pore pressure of 20 MPa, and temperature of 260°C, simulating a
Authors
Aida Farough, Diane E. Moore, David A. Lockner, R.P. Lowell
Pseudotachylyte increases the post-slip strength of faults
Solidified frictional melts, or pseudotachylytes, are observed in exhumed faults from across the seismogenic zone. These unique fault rocks, and many experimental studies, suggest that frictional melting can be an important process during earthquakes. However, it remains unknown how melting affects the post-slip strength of the fault and why many exhumed faults do not contain pseudotachylyte. Anal
Authors
Brooks P. Proctor, David A. Lockner
Low resistivity and permeability in actively deforming shear zones on the San Andreas Fault at SAFOD
The San Andreas Fault Observatory at Depth (SAFOD) scientific drillhole near Parkfield, California crosses the San Andreas Fault at a depth of 2.7 km. Downhole measurements and analysis of core retrieved from Phase 3 drilling reveal two narrow, actively deforming zones of smectite-clay gouge within a roughly 200 m-wide fault damage zone of sandstones, siltstones and mudstones. Here we report ele
Authors
Carolyn A. Morrow, David A. Lockner, Stephen H. Hickman
A robust calibration technique for acoustic emission systems based on momentum transfer from a ball drop
We describe a technique to estimate the seismic moment of acoustic emissions and other extremely small seismic events. Unlike previous calibration techniques, it does not require modeling of the wave propagation, sensor response, or signal conditioning. Rather, this technique calibrates the recording system as a whole and uses a ball impact as a reference source or empirical Green’s function. To c
Authors
Gregory C. McLaskey, David A. Lockner, Brian D. Kilgore, Nicholas M. Beeler
Preslip and cascade processes initiating laboratory stick slip
Recent modeling studies have explored whether earthquakes begin with a large aseismic nucleation process or initiate dynamically from the rapid growth of a smaller instability in a “cascade-up” process. To explore such a case in the laboratory, we study the initiation of dynamic rupture (stick slip) of a smooth saw-cut fault in a 76mm diameter cylindrical granite laboratory sample at 40–120MPa con
Authors
Gregory C. McLaskey, David A. Lockner
Laboratory generated M -6 earthquakes
We consider whether mm-scale earthquake-like seismic events generated in laboratory experiments are consistent with our understanding of the physics of larger earthquakes. This work focuses on a population of 48 very small shocks that are foreshocks and aftershocks of stick–slip events occurring on a 2.0 m by 0.4 m simulated strike-slip fault cut through a large granite sample. Unlike the larger s
Authors
Gregory C. McLaskey, Brian D. Kilgore, David A. Lockner, Nicholas M. Beeler
Deep permeability of the San Andreas Fault from San Andreas Fault Observatory at Depth (SAFOD) core samples
The San Andreas Fault Observatory at Depth (SAFOD) scientific borehole near Parkfield, California crosses two actively creeping shear zones at a depth of 2.7 km. Core samples retrieved from these active strands consist of a foliated, Mg-clay-rich gouge containing porphyroclasts of serpentinite and sedimentary rock. The adjacent damage zone and country rocks are comprised of variably deformed, fine
Authors
Carolyn A. Morrow, David A. Lockner, Diane E. Moore, Stephen H. Hickman
Science and Products
Filter Total Items: 13
No Result Found
Filter Total Items: 112
Earthquake source properties from instrumented laboratory stick-slip
Stick-slip experiments were performed to determine the influence of the testing apparatus on source properties, develop methods to relate stick-slip to natural earthquakes and examine the hypothesis of McGarr [2012] that the product of stiffness, k, and slip duration, Δt, is scale-independent and the same order as for earthquakes. The experiments use the double-direct shear geometry, Sierra White
Authors
Brian D. Kilgore, Arthur F. McGarr, Nicholas M. Beeler, David A. Lockner
Frictional strength of wet and dry montmorillonite
Montmorillonite is a common mineral in fault zones, and its low strength relative to other common gouge minerals is important in many models of fault rheology. However, the coefficient of friction, μ, varies with degree of saturation and is not well constrained in the literature due to the difficulty of establishing fully drained or fully dried states in the laboratory. We measured μ of both satur
Authors
Carolyn A. Morrow, Diane E. Moore, David A. Lockner
Calibrated acoustic emission system records M -3.5 to M -8 events generated on a saw-cut granite sample
Acoustic emission (AE) analyses have been used for decades for rock mechanics testing, but because AE systems are not typically calibrated, the absolute sizes of dynamic microcrack growth and other physical processes responsible for the generation of AEs are poorly constrained. We describe a calibration technique for the AE recording system as a whole (transducers + amplifiers + digitizers + sampl
Authors
Gregory C. McLaskey, David A. Lockner
Hydrothermal frictional strengths of rock and mineral samples relevant to the creeping section of the San Andreas Fault
We compare frictional strengths in the temperature range 25–250 °C of fault gouge from SAFOD (CDZ and SDZ) with quartzofeldspathic wall rocks typical of the central creeping section of the San Andreas Fault (Great Valley sequence and Franciscan Complex). The Great Valley and Franciscan samples have coefficients of friction, μ > 0.35 at all experimental conditions. Strength is unchanged between 25°
Authors
Diane E. Moore, David A. Lockner, Stephen H. Hickman
Gallery of melt textures developed in Westerly Granite during high-pressure triaxial friction experiments
IntroductionMelting occurred during stick-slip faulting of granite blocks sheared at room-dry, room-temperature conditions in a triaxial apparatus at 200–400 megapascals (MPa) confining pressure. Petrographic examinations of melt textures focused largely on the 400-MPa run products. This report presents an overview of the petrographic data collected on those samples, followed by brief descriptions
Authors
Diane E. Moore, David A. Lockner, Brian D. Kilgore, Nicholas M. Beeler
Evolution of fracture permeability of ultramafic rocks undergoing serpentinization at hydrothermal conditions: An experimental study
We performed flow-through laboratory experiments on five cylindrically cored samples of ultramafic rocks, in which we generated a well-mated through-going tensile fracture, to investigate evolution of fracture permeability during serpentinization. The samples were tested in a triaxial loading machine at a confining pressure of 50 MPa, pore pressure of 20 MPa, and temperature of 260°C, simulating a
Authors
Aida Farough, Diane E. Moore, David A. Lockner, R.P. Lowell
Pseudotachylyte increases the post-slip strength of faults
Solidified frictional melts, or pseudotachylytes, are observed in exhumed faults from across the seismogenic zone. These unique fault rocks, and many experimental studies, suggest that frictional melting can be an important process during earthquakes. However, it remains unknown how melting affects the post-slip strength of the fault and why many exhumed faults do not contain pseudotachylyte. Anal
Authors
Brooks P. Proctor, David A. Lockner
Low resistivity and permeability in actively deforming shear zones on the San Andreas Fault at SAFOD
The San Andreas Fault Observatory at Depth (SAFOD) scientific drillhole near Parkfield, California crosses the San Andreas Fault at a depth of 2.7 km. Downhole measurements and analysis of core retrieved from Phase 3 drilling reveal two narrow, actively deforming zones of smectite-clay gouge within a roughly 200 m-wide fault damage zone of sandstones, siltstones and mudstones. Here we report ele
Authors
Carolyn A. Morrow, David A. Lockner, Stephen H. Hickman
A robust calibration technique for acoustic emission systems based on momentum transfer from a ball drop
We describe a technique to estimate the seismic moment of acoustic emissions and other extremely small seismic events. Unlike previous calibration techniques, it does not require modeling of the wave propagation, sensor response, or signal conditioning. Rather, this technique calibrates the recording system as a whole and uses a ball impact as a reference source or empirical Green’s function. To c
Authors
Gregory C. McLaskey, David A. Lockner, Brian D. Kilgore, Nicholas M. Beeler
Preslip and cascade processes initiating laboratory stick slip
Recent modeling studies have explored whether earthquakes begin with a large aseismic nucleation process or initiate dynamically from the rapid growth of a smaller instability in a “cascade-up” process. To explore such a case in the laboratory, we study the initiation of dynamic rupture (stick slip) of a smooth saw-cut fault in a 76mm diameter cylindrical granite laboratory sample at 40–120MPa con
Authors
Gregory C. McLaskey, David A. Lockner
Laboratory generated M -6 earthquakes
We consider whether mm-scale earthquake-like seismic events generated in laboratory experiments are consistent with our understanding of the physics of larger earthquakes. This work focuses on a population of 48 very small shocks that are foreshocks and aftershocks of stick–slip events occurring on a 2.0 m by 0.4 m simulated strike-slip fault cut through a large granite sample. Unlike the larger s
Authors
Gregory C. McLaskey, Brian D. Kilgore, David A. Lockner, Nicholas M. Beeler
Deep permeability of the San Andreas Fault from San Andreas Fault Observatory at Depth (SAFOD) core samples
The San Andreas Fault Observatory at Depth (SAFOD) scientific borehole near Parkfield, California crosses two actively creeping shear zones at a depth of 2.7 km. Core samples retrieved from these active strands consist of a foliated, Mg-clay-rich gouge containing porphyroclasts of serpentinite and sedimentary rock. The adjacent damage zone and country rocks are comprised of variably deformed, fine
Authors
Carolyn A. Morrow, David A. Lockner, Diane E. Moore, Stephen H. Hickman