Publications

American Samoa and the neighboring islands of the South Pacific lie near active tectonic-plate boundaries that host many large earthquakes which can result in strong earthquake shaking and tsunamis. To mitigate earthquake risks from future ground shaking, the Federal Emergency Management Agency requested that the U.S. Geological Survey prepare seismic hazard maps that can be applied in building-de

We discuss the designs and testing of three rotational seismometer prototypes developed at the Institute of Geophysics, Academy of Sciences (Prague, Czech Republic). Two of these designs consist of a liquid-filled toroidal tube with the liquid as the proof mass and providing damping; we tested the piezoelectric and pressure transduction versions of this torus. The third design is a wheel-shaped so

In collaboration with the U.S. Department of Veterans Affairs (VA), the National Strong Motion Project of the U.S. Geological Survey has recently installed sophisticated seismic systems that will monitor the structural integrity of hospital buildings during earthquake shaking. The new systems have been installed at more than 20 VA medical campuses across the country. These monitoring systems, whic

Turbidite systems along the continental margin of Cascadia Basin from Vancouver Island, Canada, to Cape Mendocino, California, United States, have been investigated with swath bathymetry; newly collected and archive piston, gravity, kasten, and box cores; and accelerator mass spectrometry radiocarbon dates. The purpose of this study is to test the applicability of the Holocene turbidite record as

The intensity data collected by the U.S. Geological Survey (USGS) "Did You Feel It?" (DYFI) Website (USGS, DYFI; http://earthquake.usgs.gov/earthquakes/dyfi/events/se/082311a/us/index.html, last accessed Sept 2011) for the Mw5.8 Mineral, Virginia, earthquake, are unprecedented in their spatial richness and geographical extent. More than 133,000 responses were received during the first week followi

The Evansville (Indiana) Area Earthquake Hazards Mapping Project was completed in February 2012. It was a collaborative effort among the U.S. Geological Survey and regional partners Purdue University; the Center for Earthquake Research and Information at the University of Memphis; the state geologic surveys of Kentucky, Illinois, and Indiana; the Southwest Indiana Disaster Resistant Community Corp

The purpose of this study is to develop and test a modification to a previous method of regional seismic event location based on Empirical Green’s Functions (EGFs) produced from ambient seismic noise. Elastic EGFs between pairs of seismic stations are determined by cross-correlating long ambient noise time-series recorded at the two stations. The EGFs principally contain Rayleigh- and Love-wave ene

Why there is a need for measurement standards of magnitudes: In October 2005, the Commission on Seismic Observation and Interpretation of the International Association of Seismology and Physics of the Earth´s Interior (IASPEI) adopted the summary recommendations made by the IASPEI Working Group on Magnitudes on new measurement standards for widely used local, regional and teleseismic magnitude sc

We have estimated the source parameters of interplate earthquakes in an earthquake cluster off Kamaishi, NE Japan over two cycles of M~ 4.9 repeating earthquakes. The M~ 4.9 earthquake sequence is composed of nine events that occurred since 1957 which have a strong periodicity (5.5 ± 0.7 yr) and constant size (M4.9 ± 0.2), probably due to stable sliding around the source area (asperity). Using P-

We determine frequency-dependent attenuation 1/Q(f) for the Hispaniola region using direct S and Lg waves over five distinct passbands from 0.5 to 16 Hz. Data consist of 832 high-quality vertical and horizontal component waveforms recorded on short-period and broadband seismometers from the devastating 12 January 2010 M 7.0 Haiti earthquake and the rich sequence of aftershocks. For the distance ra

We conducted active and passive seismic imaging investigations along a 5.6-km-long, east–west transect ending at the mapped trace of the Wasatch fault in southern Utah Valley. Using two-dimensional (2D) P-wave seismic reflection data, we imaged basin deformation and faulting to a depth of 1.4 km and developed a detailed interval velocity model for prestack depth migration and 2D ground-motion simu

Mapping the digital record of a seismograph into true ground motion requires the correction of the data by some description of the instrument's response. For the Global Seismographic Network (Butler et al., 2004), as well as many other networks, this instrument response is represented as a Laplace domain pole–zero model and published in the Standard for the Exchange of Earthquake Data (SEED) forma