Publications

We present evidence that the Seattle fault zone of Washington State extends to the west edge of the Puget Lowland and is kinemati-cally linked to active faults that border the Olympic Massif, including the Saddle Moun-tain deformation zone. Newly acquired high-resolution seismic reflection and marine magnetic data suggest that the Seattle fault zone extends west beyond the Seattle Basin to form a

The 11 March 2011 M 9.0 Great East Japan earthquake generated significant long-duration shaking that propagated hundreds of kilometers from the epicenter and affected urban areas throughout much of Honshu. Recorded responses of a tall building at 770 km from the epicenter of the mainshock and other related or unrelated events show how structures sensitive to long-period motions can be affected by

VS30, defined as the average seismic shear-wave velocity from the surface to a depth of 30 meters, has found wide-spread use as a parameter to characterize site response for simplified earthquake resistant design as implemented in building codes worldwide. VS30 , as initially introduced by the author for the US 1994 NEHRP Building Code, provides unambiguous definitions of site classes and site coe

Strong-motion data of engineering and scientific importance from the United States and other seismically active countries are served through the Center for Engineering Strong Motion Data (CESMD) at www.strongmotioncenter.org. Recently, the CESMD staff, with cooperation from colleagues at international strong-motion seismic networks, has disseminated strong-motion data from significant earthquakes

Nearly 1 year ago, on 23 August, tens of millions of people in the eastern United States and southeastern Canada were startled in the middle of their workday (1:51 P.M. local time) by the sudden onset of moderate to strong ground shaking from a rare magnitude (M) 5.8 earthquake in central Virginia. Treating the shaking as if it were a fire drill, millions of workers in Washington, D. C., New York

A 64-story, performance-based design building with reinforced concrete core shear-walls and unique dynamic response modification features (tuned liquid sloshing dampers and buckling-restrained braces) has been instrumented with a monitoring array of 72 channels of accelerometers. Ambient vibration data recorded are analyzed to identify modes and associated frequencies and damping. The low-amplitud

We have developed and tested (calibration, linearity, and cross-axis errors) a new six-degree-of-freedom mechanical seismic sensor for collocated measurements of three translational and three rotational ground motion velocity components. The device consists of standard geophones arranged in parallel pairs to detect spatial gradients. The instrument operates in a high-frequency range (above the nat

The three largest recent great subduction zone earthquakes (2011 M9.0 Tohoku, Japan; 2010 M8.8 Maule, Chile; and 2004 M9.2 Sumatra-Andaman) exhibit similar coseismic rotations of the principal stress axes. Prior to each mainshock, the maximum compressive stress axis was shallowly plunging, while immediately after the mainshock, both the maximum and minimum compressive stress axes plunge at ~45°. D

Ground motion prediction equations (GMPEs) for elastic response spectra, including the Next Generation Attenuation (NGA) models, are typically developed at a 5% viscous damping ratio. In reality, however, structural and non-structural systems can have damping ratios other than 5%, depending on various factors such as structural types, construction materials, level of ground motion excitations, amo

We introduce the second version of the U.S. Geological Survey ShakeMap Atlas, which is an openly-available compilation of nearly 8,000 ShakeMaps of the most significant global earthquakes between 1973 and 2011. This revision of the Atlas includes: (1) a new version of the ShakeMap software that improves data usage and uncertainty estimations; (2) an updated earthquake source catalogue that include

Despite obvious limitations as a proxy for site amplification, the use of time-averaged shear-wave velocity over the top 30 m (VS30) remains widely practiced, most notably through its use as an explanatory variable in ground motion prediction equations (and thus hazard maps and ShakeMaps, among other applications). As such, we are developing an improved strategy for producing VS30 maps given the c

The U.S. National Seismic Hazard Maps are revised every six years, corresponding with the update cycle of the International Building Code. These maps cover the conterminous U.S. and will be updated in 2014 using the best-available science that is obtained from colleagues at regional and topical workshops, which are convened in 2012-2013. Maps for Alaska and Hawaii will be updated shortly following