Publications

Ammonia was produced by 12 companies at 27 plants in 15 states in the United States during 2011. Sixty-one percent of total U.S. ammonia production capacity was centered in Louisiana, Oklahoma and Texas because of those states' large reserves of natural gas, the dominant domestic feedstock. In 2011, U.S. producers operated at about 84 percent of their rated capacity (excluding plants that were idl

Common clay is a natural, fine-grained material composed of hydrous aluminum silicates. Shale is a laminated sedimentary rock formed by the consolidation of clay, mud and/or silt.

In 2011, domestic production of peat, excluding Alaska, was estimated to be 605 kt (667,000 st), compared with 628 kt (629,000 st) in 2010. In 2011, imports increased to 1.1. Mt (1.2 million st) compared with 947 kt (1 million st) in 2010, and exports were estimated to have decreased to 39 kt (43,000 st) in 2011. U.S. apparent consumption for 2011 was estimated to have increased to 1.6 Mt (1.7 mil

Five companies mined fire clay in four states in 2011. Production, based on a preliminary survey of the fire clay industry, was estimated to be 240 kt (265,000 st), valued at $7.68 million, an increase from 216 kt (238,000 st), valued at $6.12 million in 2010. Missouri was the leading producing state, followed by Texas, Washington and Ohio, in decreasing order by quantity.

Production of pumice in the United States during 2011 was estimated to be 380 kt (420,000 st), a 3-percent decrease compared with 2010. The unit value of pumice varied by end use in 2011. Pumice used as an abrasive was priced at $10.39/t ($9.30/st), while specialty-grade pumice, used in cosmetics, filtration or precision grinding, was priced as high as $150/t ($130/st) on a spot basis. Fourteen co

Rhenium, a silvery-white, heat resistant metal, has increased significantly in importance since its discovery in 1925. First isolated by a team of German chemists studying platinum ore, the mineral was named for the Rhine River. From 1925 until the 1960s, only two metric tons of rhenium were produced worldwide. Since then, its uses have steadily increased, including everything from unleaded gasoli

In 2011, world lithium consumption was estimated to have been about 25 kt (25,000 st) of lithium contained in minerals and compounds, a 10-percent increase from 2010. U.S. consumption was estimated to have been about 2 kt (2,200 st) of contained lithium, a 100-percent increase from 2010. The United States was estimated to be the fourth-ranked consumer of lithium and remained the leading importer o

This summary of international mineral exploration activities for the year 2011 draws upon available information from industry sources, published literature and U.S. Geological Survey (USGS) specialists. This summary provides data on exploration budgets by region and mineral commodity, identifies significant mineral discoveries and areas of mineral exploration, discusses government programs affecti

The Blackbird district, east-central Idaho, contains the largest known Co reserves in the United States. The origin of strata-hosted Co-Cu ± Au mineralization at Blackbird has been a matter of controversy for decades. In order to differentiate among possible genetic models for the deposits, including various combinations of volcanic, sedimentary, magmatic, and metamorphic processes, we used U-Pb g

Seawater and natural brines accounted for about 57 percent of magnesium compounds produced in the United States in 2011. Dead-burned magnesia was produced by Martin Marietta Magnesia Specialties LLC from well brines in Michigan. Caustic-calcined magnesia was recovered from seawater by Premier Magnesia LLC in Florida, from well brines in Michigan by Martin Marietta and from magnesite in Nevada by P

The article offers information on aluminum, a mineral resource which is described as the third-most abundant element in Earth's crust. According to the article, aluminum is the second-most used metal. Hans Christian Oersted, a Danish chemist, was the first to isolate aluminum in the laboratory. Aluminum is described as lightweight, corrosion-resistant and an excellent conductor of electricity and

In 2011, elemental sulfur and the byproduct sulfuric acid were produced at 109 operations in 29 states and the U.S. Virgin Islands. Total shipments were valued at about $1.6 billion. Elemental sulfur production was 8.2 Mt (9 million st); Louisiana and Texas accounted for about 53 percent of domestic production.