Denitrification measurements in aquatic sediments: A comparison of three methods

Measurements of denitrification using the acetylene inhibition,¹⁵N isotope tracer, and N₂ flux methods were carried out concurrently using sediment cores from Vilhelmsborg sø, Denmark, in an attempt to clarify some of the limitations of each technique. Three experimental treatments of overlying water were used: control, nitrate enriched, and ammonia enriched water. The N₂ flux and¹⁵N tracer experiments showed high rates of coupled nitrification/denitrification in the sediments. The acetylene inhibition method did not capture any coupled nitrification/denitrification. This could be explained by acetylene inhibition of nitrification. A combined¹⁵N tracer/acetylene inhibition experiment demonstrated that acetylene inhibition of N₂O reduction was incomplete and the method, therefore, only measured approximately 50% of the denitrification due to nitrate from the overlying water. Similar rates of denitrification due to nitrate in the overlying water were measured by the N₂ flux method and the acetylene inhibition method, after correcting for the 50% efficiency of acetylene inhibition. Rates of denitrification due to nitrate from the overlying water measured by the¹⁵N tracer method, however, were only approximately 35% or less of those measured by the acetylene inhibition or N₂ flux methods.