A method has been developed to measure nanogram per liter amounts of selected volatile organic compounds (VOCs) including dichlorodifluoromethane, trichlorofluoromethane, cis-1,2-dichloroethene, trichloroethene, tetrachloroethene, and the isomers of dichlorobenzene in water. The method uses purge-and-trap techniques on a 100 mL sample, gas chromatography with a megabore capillary column, and electron impact, selected ion monitoring mass spectrometry. Minimum detection levels for these compounds ranged from 1 to 4 ng/L in water. Recoveries from organic-free distilled water and natural groundwater ranged from 70.5% for dichlorodifluoromethane to 107.8% for 1,4-dichlorobenzene. Precision was generally best for cis-1,2-dichloroethene, tetrachloroethene, and the dichlorobenzene isomers and worst for dichlorodifluoromethane and trichlorofluoromethane. Blank data indicated persistent, trace-level introduction of dichlorodifluoromethane, 1,4-dichlorobenzene, and tetrachloroemene to samples during storage and shipment at concentrations less than the method reporting limits. The largest concentrations of the selected VOCs in 27 water samples from the Edwards aquifer near San Antonio, TX, were from confined-zone wells near an abandoned landfill. The results defined a zone of water with no detectable VOCs in nearly all of the aquifer west of San Antonio and from part of the confined zone beneath San Antonio.
