Canopy architectures of five structurally complex forest stands and three structurally simple forest stands in southwest Oregon and the Willamette Valley, Oregon, were evaluated and quantified through crown area profiles. Mixed conifer and mixed conifer hardwood stands across a range of sites were sampled for crown widths and heights. Crown width and shape equations were derived and used to quantify the stand crown area at incremental heights above the forest floor. Crown area profiles describe the spatial arrangement of aboveground forest vegetation and the total pore spaces between crowns. Plot by plot profiles were combined to produce vertical and horizontal displays of the stand crown area distribution. In complex stands, the forest space was moderately occupied by crowns from the forest floor up to heights over 30 m,
producing uniform distributions of between-crown porosity. The structurally complex stands had between-crown porosity values of 70% to 90% for more than 23 vertical metres of canopy, and they had total between-crown porosities of 86% to 91%. The structurally simple stands had between-crown porosity values of 70% to 90% for less than 8 vertical metres of canopy, and they had total between-crown porosities of 69% to 85%. Variances in crown area indicate that variation in horizontal crown area (within heights) was larger in complex stands than in simple stands, but vertical crown areas (between heights) varied less in complex stands. The study provides a basis for discriminating between canopy architectures and for quantifying the porosity of forest canopies.
