Bear Creek Valley, Tennessee contains hazardous waste disposal sites where contaminants leach into ground and surface water. Groundwater flow and the potential migration of contaminants is poorly understood. The Valley is underlain by calcareous shale that contains limestone units. Ridges to the north and south are underlain by interbedded sandstones, siltstone and shale, and by massive, siliceous dolomite, respectively. The bedrock, which dips about 45 degrees southeast, is overlain by regolith to a maximum thickness of 80 ft. Observed hydraulic conductivities for the regolith range from 0.01 to 13 ft/day, and for the bedrock, from 0.001 to 11 ft/day. Groundwater flow is probably toward streams and is preferential along strike because of an areal anisotropy in hydraulic conductivity. A cross sectional groundwater flow model was used to test the conceptualized flow system and to help identify areas where additional data are needed. The preliminary model shows a pattern of recharge at both ridges, flow toward the valley, and upward flow that discharges into Bear Creek. Final model values of hydraulic conductivity in the bedrock range from 0.01 to 0.1 ft/day and reflect an areal anisotropy ratio of 1:5. Simulated recharge was 10 inches/year. (USGS)
