Publications

A method discussed in Gibbs, Boore, et al. (1994) was applied to surface‐source, downhole‐receiver recordings at 22 boreholes, in the San Francisco Bay area in central California and the San Fernando Valley of southern California, to determine the average damping ratio of shear waves over depth intervals ranging from about 10 m to as much as 245 m (at one site), with most maximum depths being betw

Near-surface soil conditions can significantly alter the amplitude and frequency content of incoming ground motions – often with profound consequences for the built environment – and are thus important inputs to any ground-motion prediction. Previous soil-velocity models (SVM) have predicted shear-wave velocity profiles based on the time-averaged shear-wave velocity in the upper 30 m (VS30). This

We provide an overview of a 2019 workshop on the use of fragile geologic features (FGFs) to evaluate seismic hazard models. FGFs have been scarcely utilized in the evaluation of seismic hazard models, despite nearly 30 yr having passed since the first recognition of their potential value. Recently, several studies have begun to focus on the implementation of FGFs in seismic hazard modeling. The wo

Holocene crustal faulting in the northern Olympic Peninsula of Washington State manifests in a zone of west‐northwest‐striking crustal faults herein named the North Olympic fault zone, which extends for ∼80  km∼80  km along strike and includes the Lake Creek–Boundary Creek fault to the east and the Sadie Creek fault and newly discovered scarps to the west. This study focuses on the Sadie Creek fau

Fault creep reduces seismic hazard and serves as a window into plate boundary processes; however, creep rates are typically constrained with sparse measurements. We use differential lidar topography (11–13 year time span) to measure a spatially dense surface deformation field along a 150 km section of the Central San Andreas and Calaveras faults. We use an optimized windowed‐iterative‐closest‐poin

Spectral analysis is widely used to estimate and refine earthquake source parameters such as source radius, seismic moment, and stress drop. This study aims to quantify the precision of the single spectra and empirical Green's function spectral ratio approach using the Large‐n Seismic Survey in Oklahoma (LASSO) array. The dense station coverage in an area of local saltwater disposal offers a uniqu

The scarcity of strong ground motion records presents a challenge for making reliable performance assessments of tall buildings whose seismic design is controlled by large-magnitude and close-distance earthquakes. This challenge can be addressed using broadband ground-motion simulation methods to generate records with site-specific characteristics of large-magnitude events. In this paper, simulate

Induced earthquakes from waste disposal operations in otherwise tectonically stable regions significantly increases seismic hazard. It remains unclear why injections induce large earthquakes on non‐optimally oriented faults kilometers below the injection horizon, particularly since fluids are not injected under pressure, but rather poured, into the well as observed in the Milan, Kansas area. Here

New seismic stations added to a regional seismic network cannot be used to calculate local magnitude (⁠ML⁠) until a revised regionwide amplitude decay function is developed. Each station must record a minimum number of local and regional earthquakes that meet specific amplitude requirements prior to recalibration of the amplitude decay function. Station component adjustments (⁠dML⁠; Uhrhammer et a

Ground motions in the Los Angeles Basin during large earthquakes are modulated by earthquake ruptures, path effects into the basin, basin effects, and local site response. We analyzed the direct effect of shallow basin structures on shaking duration at a period of 2–10 s in the Los Angeles region through modeling small magnitude, shallow, and deep earthquake pairs. The source depth modulates the b

Peak ground velocity (PGV) is a commonly used parameter in earthquake ground‐motion models (GMMs) and hazard analyses, because it is closely related to structural damage and felt ground shaking, and is typically measured on broadband seismometers. Here, we demonstrate that strainmeters, which directly measure in situ strain in the bulk rock, can easily be related to ground velocity by a factor of

The coastal Pacific Northwest USA hosts thousands of deep-seated landslides. Historic landslides have primarily been triggered by rainfall, but the region is also prone to large earthquakes on the 1100-km-long Cascadia Subduction Zone megathrust. Little is known about the number of landslides triggered by these earthquakes because the last magnitude 9 rupture occurred in 1700 CE. Here, we map 9938